Hewbury Paint® GRIP & BLOCK PRIMER (Grey)
HEWBURY PAINT® Grip & Block Primer is a water-based, low VOC, 100% acrylic undercoat. Promotes adhesion and has excellent blocking capabilities, trapping stains and tannins, covering repair patches and blocking odours. It is tough, flexible and breathable, suitable for both indoor and outdoor projects. Water-resistant and suitable for both porous and non-porous substrates. Also contains a flash rust inhibitor for use on steel and other metals. Available in both white and grey. Use grey to achieve a more accurate colour match in fewer coats under deep and bright colours, such as Pompous Pink and Queen of Hearts.
No more confusing yourself over which primer to use as this one does both jobs :-)
SURFACE PREPARATION The surface must be clean, free of dust, grease, wax, peeling paint, and mildew. Use a non-soapy detergent or a TSP substitute. Rinse well and allow to dry. High Gloss Surfaces: For maximum adhesion, scuff-sand the surface thoroughly before priming. If painting laminate, wipe down with isopropyl alcohol as your final step after sanding. Touch-dry 30 minutes. Re-coat 4 hours. Hard-dry 8 hours. Longer dry time required in cooler temperatures and in higher humidity. Tougher stains may require 12 hours between coats to fully lock in stain. Use in a well-ventilated area. Wash up with water.